Business Products & Services

The most common problems with plastic bag machine

Plastic Bag Machine is the final step in the manufacturing and processing of plastic bag. If the performance of bag making process isn’t high enough or the quantity of waste is excessive, the previous processes , such as blowing film machine or composite printing machine could end up being used up and downstream customers are likely to have an enormous effects on the manufacturing and operations.

1. What can I do if my bag’s contents leak or become damaged because of the insufficient sealant of the plastic bag machine?
Cause: Low anti-pollution heat-sealability for the film, mostly due to the resin that is used in the sealing layer isn’t suitable for.
Countermeasures: Select a film that has excellent anti-pollution heat-sealability. The general rule is that ldpe has moderate anti-pollution heating capacity. EVA is a good anti-pollution heat sealability in the event that the VA contents are large. Ionic resin and metallocene-based polymer It is extremely effective in preventing pollution heat-sealability.

2.What can I do when the seal of the plastic bag machine isn’t as strong?

 Reasons:
1. The temperature of heat sealing is too high.
2. Pressure is too high.
3. The time to seal heat is too long.
4. Edge of upper portion of the sealer sharp or coating is damaged.
5. The seal at the bottom is Silicone rubber that is too for the job;
6. During the process of compounding and curing during the curing and compounding process, a portion of the adhesive gets absorbed into the film. When the substrate is impacted by the adhesive. The hardness (that is, resistance to impact) is reduced and the brittleness grown;
7 polymer composite bags for packaging Following cooling and putting in place the bags in the heat seal is increased as well as it tends to soften.

Countermeasures:

1. Based on the characteristics of heat sealing of the inner sealing material, select the proper temperatures, pressure, and time for heat sealing;

2. Improve the condition of the surface of the top heat sealing knife, making the sealer’s surface smooth;

3. Cover with polyethylene cloth cover is intact.

4. Select a rubber pad made of silicone that is of the right degree of hardness.

What can I do if my bag starts to shrink after being sealant by the bag-making machine?
The reason:
1. Its thickness in the composite film appears not uniform;
2. The temperature of heat sealing is too high, or the time for heat sealing will be long.
3. In the heat sealing knife’s longitudinal section The running path of composite films isn’t straight.
4. Insufficient cooling.
5. The time for curing isn’t enough.
6. The film that covers the surface of the substrate is not very resistant to heat.
7. Inadequate control of the tension match on the surface of the composite film during the process of compounding can result in residual stress after curing and setting. This is especially true because the film is less and such failures are more likely to occur.
Countermeasure
1. The tension can be adjusted on the roller floating.
2. Utilize an inner sealing base material that has low temperature heat sealability.
3. Adjust the temperature of the heat seal to the appropriate temperature.
4. It is important to cool down.
5. Create a film that is mature.
6. Re-select the film on the surface.
7. Adjust the tension on each component of the composite processing equipment, and then try to ensure that both substrates shrink the same.

What can I do if I notice that the outer shape of the heat-sealed exterior of the plastic bag making machine isn’t clear after sealing? (The knife’s pattern isn’t transparent)
The reason is:
1. The cooling process is short.
2. The cooling plate is not in good contact with the plate
3. When the pad of silicone is heated, the edges melt.
4. Forces of heat sealing in the longitudinal direction that are not balanced
5. Edge of heat sealing knife is uneven and sharp.
Countermeasure
1. Change the cooling duration.
2. Adjust the cooling plate to your liking.
3. Adjust or replace the knife that seals heat
4. Stop the melting of the edges caused by the overheating of silicon pad.

What can I do if the sealing power of the bag making machine is weak after sealing?
the reasonfor this:
1. The adhesive contained in the composite film hasn’t been sufficiently cured.
2. The conditions for heat sealing are not appropriate.
3. Between the knife that seals the temperature and the cooling knife is too long.
4. There is an issue with the outer layer of sealing.
5. The ability to seal heat in the ink is not as strong, which results in a reduction in the strength of the composite of the film on the part that is sealed with heat.
6. Dust and spray powders as well as other substances stick with the heat of the covers.
7. The strength of the composite is not high or the strength of the heat sealed place is reduced too much.

Countermeasures:
1. Help to promote the hardening process of adhesive (curing or curing) by conserving heat and aging. This will improve the strength and resistance to heat of the film.
2. Find the ideal conditions for heat-sealing (temperature time, pressure and temperature) in accordance with the structure that the film has, the its heat-sealing state and so on. You can also enhance the method of heat-sealing, and then cool down right away after the heat-sealing process.
3. Examine the shelf condition and shelf life of the film that is heat-sealable. If the film that is heat-sealable uses the older batch of film and is the same film has been sealed needs special attention.
4. The thickness of the film that can be heat-sealable.
5. Modify the type and the grade of the film that can be heat-sealable and choose a film that has anti-pollution heat-sealability.
6. Make sure the quality of the adhesive meets standards (the release of low-molecular substances within the resin could influence its composition)
7. Improve the heat sealing efficiency for the layer of heat. regulate the contents of the slip agents and make use of the mlldpe film.
8. Monitor the monomer concentration that is present in MDI inside the adhesive.

What can I do if there are air bubbles and uneven surfaces appear in the heat-sealed area of the bag maker machine?
The reason is:
1. If heat-sealing takes place on an object made up of hygroscopic material like nylon film, the hygroscopic film can create air bubbles after the film absorbs water.
2. The heat-sealing knife , or the heat-sealing pad of silicone is not even.
3. Insufficient pressure for heat sealing.
4. Utilizing one-component adhesives like neoprene, when sealing bags with heat are used, the heat cover can be prone to pits.
Countermeasures:
1. Make sure to store the raw materials and semi-finished goods in a proper manner to prevent water absorption.
2. Adjust or check your heat sealing blade or the heat sealing pad.
3. Removing the glue tape.

If you need any information of blown fim extrusion,plastic bag machine,printing machine,please feel free to contact us. Kingdom Machine Factory  Mobile:0086-13088651008;0086-13958812663;
Whatsapp/Viber/Tango:0086-13088651008;0086-13958812663;
sale@kingdommachine.com;kingdombillwang@hotmail.com; www.blownfilmextrusion.com; www.kingdommachine.com;
Ruian Economic Zone,Wenzhou,China

How to Maximize Workspace with Affordable Used Office Cubicles

In today’s bustling business landscape, where every inch of space counts and budget constraints reign supreme, the quest for workspace optimization and cost-effectiveness takes center stage. Against this backdrop, one often underestimated solution shines as a practical option: the adoption of used office cubicles. By embracing previously owned cubicles, businesses can enjoy substantial financial savings without sacrificing quality or functionality. How can you maximize workspace with affordable used office cubicles? Read more now or view here this page to Find out

The rationale behind opting for used office cubicles is multifaceted and compelling. While the allure of brand-new furniture may be strong, the associated costs can quickly escalate, especially for businesses managing tight budgets. This is where the attractiveness of used cubicles becomes apparent.This is precisely where the appeal of used cubicles becomes evident. By tapping into the secondary market, businesses can significantly reduce upfront costs while still creating a workspace that is both functional and visually appealing.

At the core of the used office cubicle paradigm lies a focus on cost-effectiveness.The allure of acquiring top-tier cubicles at a fraction of the cost of their pristine counterparts is undeniable.This fiscal prudence not only facilitates prudent budget management but also empowers businesses, irrespective of size or stature, to allocate resources judiciously, thereby fostering a culture of financial resilience and adaptability.

Contrary to common misconceptions, the realm of used office cubicles presents a diverse range of options, spanning different styles, setups, and customization possibilities. Whether your preferences lean towards classic cubicles with ample storage or open-concept workstations promoting collaboration, the extensive choices in the secondary market guarantee a bespoke solution for any organizational requirement.

Moreover, the decision to invest in used office cubicles transcends mere financial prudence; it embodies a commitment to environmental stewardship and sustainability.By repurposing pre-owned furniture, businesses not only extend the lifecycle of existing materials but also curtail the demand for new resources, thereby mitigating waste and reducing their carbon footprint. This combination of financial prudence and environmental awareness highlights the comprehensive advantages of adopting the ethos of used office cubicles.

Once the decision to procure used office cubicles is made, the journey towards workspace optimization commences.Strategies ranging from meticulous space planning to the incorporation of ergonomic design principles and collaborative workspaces can unlock the latent potential of the office environment, fostering a culture of productivity, innovation, and well-being.

From incorporating technology to strategically implementing greenery, the array of tools available for enhancing used office cubicles is both diverse and powerful. Embracing these tactics enables businesses to turn their workspaces into lively centers of creativity and collaboration, while also enjoying the numerous advantages of cost efficiency and environmental responsibility.

Why it Is Important to Get a Free Virtual Address for Your Business

Businesspeople are always in search of ways to reduce overhead costs and streamline operations. One popular way is with the help of a virtual address for businesses. In the current digital era, the words ‘digital address’ can seem somehow mystifying. Nonetheless, it is a powerful tool that can provide huge benefits to startups. This solution can also offer irresistible benefits to freelancers and established businesses. In this article, we will examine why a free virtual address for businesses is a viable option . Ensure you click for more here!

The first benefit here is that you’ll improve your professional image. With a virtual address, your business can get a polished and professional reputation. Instead of utilizing a P.O box or your house address, obtain a free virtual address so that you can have a physical address in a respected location. This does not only add credibility to your company; it also helps build trust with potential customers and partners. It doesn’t only show that you are serious regarding your business but that you have also invested in building a professional presence.

The second advantage to click here for is that it reduces overhead costs. Renting a physical workplace can be costly, more so for new businesses. A free virtual address is an option you can easily afford. A virtual address can enable you to cut costs on utilities, rent, and more overhead costs that traditional offices demand. This way, you can allocate those resources towards improving your business. For instance, you can allocate resources towards upgrading equipment, employing staff, or marketing efforts.

On top of these pros is that of increased mobility and flexibility. A free virtual address also offers the advantage of flexibility and mobility Internet connection is all you need to be able to manage your enterprise from anywhere. As a result, you can conduct virtual meetings, work remotely and run your business on-the-go. If shifting is needed due to professional or personal reasons, you’ll not have to have a different virtual address. This eliminates the stress of altering your business address, thereby avoiding potential interruptions to your operations. For instance, digital nomads can gain immensely from a free virtual address as it helps them maintain a professional presence. One can receive packages and mails while on the move.

An unpaid for virtual address for businesses gives many advantages that can assist one to run and grow their businesses. It lowers overhead expenses, increases flexibility and mobility, and improves your business image. Thus, if you want to build credibility for your business, a free virtual address is a great option.